ROMarin

The kit contains:

• Ready-made, red-pigmented hull, clear moulded superstructure (no glazing panels to cut out) and deck (all parts trimmed to shape) 
• Full set of laser-cut parts for installing the power and radio control systems
• Complete rudder system, stern tube and propeller shaft, propeller and coupling
• Self-adhesive decals and window masks
• Building instructions with drawings

Kit includes the Dolly Fitting Set featuring parts such as bollards, life ring, flag with flagstaff, horn and the complete lamps.

The launch Dolly can be converted into a fire-fighting launch by installing the special function set. The special function set fire monitor can be added after the model has been completed; painting work is easier to carry out during assembly.

Contents:

• operating fire monitor
• pump
• connecting hardware.

The kit contains:

• Hull, deck, cabin insert, seat backrest and instrument panel moulded in white and clear plastic
• Complete stern tube with coupling and three-bladed propeller
• Rudder system including tiller and control linkage
• Decal sheet, glazing panel masks
• All fittings, including cleats, ship‘s wheel, flag and horns
• Detailed building instructions and plan

RC functions:

• Rudder
• Motor control

The kit contains:

• Hull, bulwark, machine and wheelhouse of vacuum formed ABS plastic
• Fire monitor and other plastic hardware
• Laser cut wood parts for interior work
• Prop shaft, propeller
• Injection moulded Kort nozzle, functional towing gear and stanchions
• RC connection parts, small accessories for construction
• Detailed fully illustrated construction manual, detailed drawings

Kit includes the Neptun Fitting Set featuring parts such as anchor, windlass, bollard, life raft, illuminated top and position lights, towing winch, tyre fender and many other small parts for completion of the scale detailing.

The kit contains:

• Hull and deep deck (plastic with moulded spray rails) 
• 2 Navy Speed direct drives 
• 2 Navy 44 cross joint couplings 
• 2 Stern tubes with shafts
• Rubbing strips, high coaming
• Superstructure (made of plastic and can be removed in one piece)
• Laser cut parts for the fly bridge and interior fittings
• RC parts, decals
• Detailed construction manual

  
  

Kit includes the San Diego Mega Yacht Fitting Set for completion of the scale detailing.

The kit contains:

• One-piece ABS hull (no bonding of the hull and deck required) with integral keel fin
• Deep drawn cockpit and sliding hatch
• Lasered frames and parts for interior work as well as sliding hatch and boat stand
• Ready-to-install plastic rudder with shaft
• Ready-cut sail, one-piece aluminum mast, aluminum booms
• All fittings for the sail
• Detailed construction manual

Kit includes the Comtesse Fitting Set featuring parts such as lamps, wheel and parts for the steering column, winches, stanchions and many other small parts for completion of the scale detailing.

To improve the sailing characteristics of model sailing yachts, such as Comtesse. At the same time the draft is kept low. Metal casting.
Weight approx. 850g
Dimensions approx. 30x140x20 mm

Ballast for ship models.
The iron balls have a diameter of 0.8 mm.
Inexpensive and easy to use.

The kit contains:

• Vacuum-moulded plastic hull, superstructure and other parts
• Die-cut plastic decks and small parts
• Die-cut plywood parts, e.g. motor bulkhead and pump plate
• Three working fire monitors
• Articulated boat crane
• Two propellers, four rudder sets, all linkage hardware for RC installation
• Painting masks
• Decal sheet
• Detailed building instructions and plan
  

Kit includes the Dusseldorf Fitting Set featuring parts such as companions, towing gear, lifebuoys, lamps, metal anchors, stanchions, horn and many other small parts, over 260 in total, for completion of the scale detailing.

The special function set contains all the parts needed to install the special functions shown in the plans of the kit Dusseldorf. The following functions are possible with these parts: Proportional horizontal and vertical moving of the monitors; Activate pump; Moving the boat crane; Illuminate all lamps on board.

The kit contains:

• Vacuum-moulded white ABS plastic hull and superstructure
• Die-cut parts for deck and superstructure
• Laser-cut parts for power system mountings and electronic component supports
• Complete rudder system
• Injection-moulded Kort nozzles
• Small hardware items
• Components for foremast, mainmast, crane etc.
• Decal sheet
• Building instructions with drawings and photographs
• Boatstand
  

Kit includes the Happy Hunter Fitting Set featuring parts such as fenders, anchor, anchor winch, anchor chain, rope, lifeboat, stanchions, lights with LED and many other small parts for completion of the scale detailing.

The kit contains:

• Vacuum-moulded ABS plastic hull and superstructure
• Laser engraved ply deck planking
• Laser-cut plywood wheelhouse and companionway
• Masts and yards
• Steering system and linkage
• Ship propeller and shaft
• RC Connectors

• Building instructions with drawings and photographs
• Boat stand
  

Kit includes the Antje Fitting Set for completion of the scale detailing.

The kit contains:

• Vacuum-moulded plastic hull and deck
• Vacuum-moulded deck superstructure formed in clear material; windows do not need to be cut out separately
• Die-cut internal hull fittings
• Complete rudder system
• Stern tube, shaft and propeller
• Shaft coupling
• All parts for the salvage crane
• Decal sheet
• Building instructions and plan
• Complete fittings set

Please note, optional buoy set and crew figures are not included.

Kit for two buoys in the scale 1:25. Made of metal and plastic.

The kit contains:

• Vacuum-moulded plastic hull
• Vacuum-moulded plastic deck and superstructure components
• Clear vacuum-moulded glazing sections
• Die-cut plastic parts for RC installation
• Stern tube with shaft and propeller
• Accessories for motor and RC installation
• Rudder system
• Complete fittings set
• Decal sheet
• Illustrated building instructions
• Boatstand

The kit contains:

• Deep-drawn plastic hull, deck and body parts
• Transparent deep-drawn glazing
• Laser cut plastic parts for RC installation
• Accessories for engine and RC installation
• Tube, propeller and shaft
• Rudder system
• Complete fittings
• Decorative sheet including masking foil for the lettering
• Building instructions with drawings and photographs
• Boat stand

The kit contains:

• Hull, deck and seat in vacuum formed ABS-plastic
• Rubber section rubbing strip
• CNC-routed ABS-plastic parts for drive and RC-installation
• Multi-piece driver figure in plastic
• Steering wheel and mirror in injection moulded plastic
• Drive shafts Ø 4 mm with stuffing tubes (2x)
• Propellers Ø 33 mm (left and right hand rotations)
• Dagger board and mounting
• Hardware/small parts for assembly
• Multi coloured decals
• Multi-lingual instructions
• Boat-stand

Brushless drive set for the model Sea Jet Evolution with 2 ROXXY BL Inrunner engines, clutches and cooling coils.